Remove the Distribution Partner Project Entry

  • At least one project is available under the Projects folder and you have enabled distribution for this project, and added the distribution partner projects in Manual or Automatic Mode.
  1. In the SMC tree, select Projects > [project].
  1. Depending on whether the project is stopped or started, do one of the following:
  • Click Edit .
  • Click Change Distribution Info .
  1. Open the Distribution Participants expander.
  • It lists all the entries for the distribution Partner projects. It also displays a read-only entry for the current project (Originator) displays.
  1. Select the distribution Partner project entry that you want to delete.
  1. Click Remove.
  • The selected distribution Partner project entry is removed from the Distribution Participants expander. Additionally, the profiles related to the extensions configured in the removed distribution partner are also removed from the Profiles expander, as well as from the profiles folder of the Originator project.
  1. Click Save Project .
  • If the selected project is a running project and has the Partner Dist Port entry (in the Distribution Connections expander), a message displays asking you to restart the project.
  1. Click OK.
  1. Restart the project by clicking Stop , and then clicking Start .

NOTE 1:
After removing the Partner entry on the Local System, it is recommended to manually remove the corresponding entry in the Partner project on the Partner System in distribution. After removing the entry on the Partner System, you do not need to restart the project.
NOTE 2:
When you want to remove a system from distribution permanently, you must manually delete the corresponding Server object from System Browser of the distribution Partner project in order to eliminate the fault message.