Adjust Positions of Report Elements

  1. Select a report element in a report definition.
  • The menus in the Position group box become available.
  1. You can adjust the position of the report element by doing one of the following:
  • Use the Position group box.
  • Click Dialog Launcher or right-click and select Position to open the Position dialog box.
  1. To set the alignment, click the required alignment type.
  1. To set the indentation, enter values in the Left or Right field (for left and right Indentation respectively). If center alignment is selected, then both these fields are unavailable.
  1. To set the spacing, type values in the Before and After fields.
  1. To set the width, first select the Width check box and enter the value in the Width field.
  1. To set the height, first select the Height check box and enter the value in the Height field. The height option is unavailable for labels.
  1. Click OK.

NOTE 1:
All fields in the Position group box and Position dialog box accept only integer and floating point values.
NOTE 2:
A negative value entered highlights the text field in red. Placing the cursor over this field informs you that the value must be greater than or equal to 0.
NOTE 3:
For logos and plots, the width-height aspect ratio is maintained, so that if you change one the other gets adjusted automatically as per the aspect ratio. While inserting logos the original aspect ratio of the image is maintained.