Configure the Service Port

You can perform this procedure only on the Desigo CC Server system.

When the Service port is already in use, you cannot start the GMS SMC Project Data Service that runs on the Service port. In this case you need to change the default value of the Service port (8888) in the Settings expander.

The Service port is used by the Client/FEP to obtain the project information from the server. This communication happens using GMS SMC ProjectData Service, which runs on the Service port. This service provides server project information (such as name, language and configured ports) to the clients.

  • You have stopped the GMS SMC Project Data Service from the Services expander.
  1. In the Settings expander, to change the Service port number, do one of the following:
  • Type the port number.
  • Increase or decrease the port number using the spin control buttons.
  1. Click Save .
    NOTE: If you start the GMS SMC Project Data Service without saving the changed port number, the service will start; however, it will not run on the new configured port. To ensure that the service runs on the new port, you must first save the changed port number and then start the GMS SMC Project Data Service.
  • The port number is configured.
  1. From the Services expander, select the GMS SMC Project Data Service and click Start.