Add a Hard Disk Drive (HDD) Object Under the Station

If a hard disk drive (HDD) object does not yet exist under the station, do this procedure to add it.

  1. Select the station that you want to monitor, at one of the following paths:
  • Project > Management System > Servers> Main Server
  • Project > Management System > Clients > [Client station]
  • Project > Management System > FEPs > [FEP station]
  1. If no hard disk drive object exists yet under the station, add and configure it as follows:
    a. Select the System Management tab.
    b. Click New , and select New Hard Disk Drive (for a server station) or New Client Hard Disk Drive (for an installed client or FEP).
    c. In the New Object dialog box, enter a name and description.
    d. Click OK.
  • The new hard disk drive object is added to System Browser. The HDD configuration displays in the System Management tab.
    NOTE: Because no drive letter has been specified yet, in the Operation tab, the Device Status is Faulty. Consequently, an alarm occurs in the Desigo CC station.