Importing an SNMP Device Configuration

You can configure an SNMP device using data from a previously-exported SNMP file (see Exporting an SNMP Device Configuration). Generally, the OIDs of the various SNMP points as well as the variable types are the same when the SNMP devices belong to the same type.

Importing an SNMP file for a custom device

If you are importing an SNMP file for a custom device, that device must already be defined in the current project. Otherwise you won’t be able to add the custom SNMP device object and import the SNMP configuration into it. See Defining a Custom SNMP Device.

  • The SNMP configuration file (a file with extension .snmp) you want to import is in the folder:
    [Installation Drive]:\[Installation Folder]\[Project Name]\devices.
  • System Manager is in Engineering mode.
  • System Browser is in Management View.
  • To speed configuration, make sure the Desigo CC Transaction Mode is set to Simple or the Automatic Switch of Transaction Mode is set to True.
    The automatic switch setting is recommended. Without it, to re-enable the logs, you need to set the Transaction Mode to Logging at the end of the configuration procedure.
  1. In System Browser, select Project > Field Networks > [SNMP network] > [SNMP device] or [SNMP property].
    NOTE: To add a new device (or property) to configure, select Project > Field Networks > [SNMP network] and create it using New .
  • The System Management tab displays.
  1. Click Import .
  1. In the Select device to import dialog box, do the following:
    a. Select the SNMP file that corresponds to the appropriate device version.
    b. Click Import.
    NOTE: If the properties names do not match, the Combines the properties dialog box displays and asks you to match the properties in the file with the device properties. Select the correct matching, and click Import.
  • If the device being imported is the same as the one used for creating the configuration file, the configuration data is copied from file to device/property.
  • During the import Class name, Vendor and type, and any DPEs (properties) belonging to the imported SNMP device are automatically populated with the OID and variable types configured in the import file.